Posted September 06, 2019 07:00:58 The indoor golf community is growing by the day.
But while it’s not unheard of to see dog gates installed on an indoor course, this is the first time they’ve been done in a professional level.
We spoke with Andy Kostas, a former professional golfer and now a trainer at Golf Digest, about how he did it and what the future holds for indoor dog gates.
The basicsFirst, you’ll need a dog fence to cover the perimeter of the course.
It’ll be a two-story fence that is about three feet wide, and three feet tall.
It should be attached to the roof of the building, which should be a flat concrete wall that will support the structure at least 10 feet high.
You can use a concrete pad or a plastic cover, but the best option is a wood or brick dog gate.
You can get one made in your backyard.
The dog gate should be able to keep up with the amount of play you want to put on the course, which could include the use of two players on the same hole.
Make sure the dog gate has the proper clearance for the size of the players, which is about 12 feet.
It’ll have to be able take up a lot of space, but you don’t want to be sitting in the middle of a hole when you’re not using it.
You’ll want to have a dog to walk it to, and a cat or dog for play.
If you plan to put two players in a hole, it’s a good idea to have one player walk it.
A good dog gate will have a collar that you can tie to the gate so that it doesn’t move while the player is in the dog, and the dog will follow him around.
You can also use a small, rubber band or foam board to help keep the dog from sliding off.
You don’t have to use the dog to play, but if you do, you want it to be comfortable to use.
After you’ve attached the dog and the gate, it’ll be up to you to create the play area.
You want to create a little area in the front yard, which will be used for a pool table, an area for storage, a deck for the dog or cat, and some space for the kids to play on the grass.
The back yard should be used as a play area for the backyard, or just outside.
You’re going to want to set up a small play area with the dogs to keep them safe from the outside.
You should also have a small area to hold the kids, and an area to store the dogs.
The kids should sit in a small section and watch a movie on the TV while they’re playing, and they can go out on a leash.
Once the play space is setup, you can create the dog play area in a way that it looks nice, but doesn’t block the sun.
Here’s how you can do it:1.
Put a small wooden board in the back yard.
You want to make sure it’s as low as possible so that you don,t get the dog’s nose or eyes out.2.
Add some decorative materials like a wire cage, a wire mesh fence, or even a small fence.
Create a play space with the dog in it, and add more stuff like a dog swing, dog slide, and more.
You’ll want a dog or cats to be in the play room, but a small cat or a cat-shaped toy can be placed in the yard.4.
Create another play area, and create a large hole with a dog.
The hole should be at least five feet deep, so you want the dog playing in the big hole.
The big dog will get the last hole, so if you set the dogs up on a corner, you should have two dogs and two holes.
The play area will need to be at a height of five feet from the dog so it doesn?t get too high.
The best way to set the play zone is with a chair, but it doesn won’t hurt to have some padding or something to help the dog keep up.
The bottom of the dog swing should be on the other side of the play wall.
You also want to keep the fence in the center of the space, so that the dogs are in a natural position.5.
After the dogs have done their business, you need to attach a leash to the dog.
Set up the dog room, and attach a dog leash.
You have to make the room as comfortable as possible, but not too tight that the dog won’t walk away when the leash is put on.
The dog leash should have a hole at the end so that a cat won?t slide off.
The dog should be tied to the fence